Study Kasus 2 Config Cisko

Router>enable

Router#con

% Ambiguous command: "con"

Router#co

Router#con

Router#config

Router#configure terminal

Router#configure terminal

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#hos

Router(config)#hostname rout

Router(config)#hostname router_Ardi

router_Ardi(config)#conf

router_Ardi(config)#ena

router_Ardi(config)#enable pass

router_Ardi(config)#enable password 123456789

router_Ardi(config)#

router_Ardi(config)#int

router_Ardi(config)#interface faste

router_Ardi(config)#interface fastethernet 0/1

router_Ardi(config-if)#ip add

router_Ardi(config-if)#ip address 192.168.10.100 255.255.255.0

router_Ardi(config-if)#no

router_Ardi(config-if)#no shut

router_Ardi(config-if)#no shutdown

router_Ardi(config-if)#

%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up

router_Ardi(config-if)#no sh

router_Ardi(config-if)#no shutdown

router_Ardi(config-if)#exit

router_Ardi(config)#exit

router_Ardi#

%SYS-5-CONFIG_I: Configured from console by console

router_Ardi#write mem

router_Ardi#write memory

Building configuration...

[OK]